Understanding the Straight Line and Accelerated Depreciation Methods

Written by

Jae Jun

follow me on




To get this kind of information and other exclusive articles before regular readers, get on the VIP Mailing List today.


What You Will Learn

  • How to Use the Straight line Method to Determine Company Asset Depreciation
  • What are the red flags to watch out for in the depreciation method

Aggressive and Conservative Accounting Series

For previous articles in the series, click on the links below.

Straight Line Acceleration Depreciation Method

The simplest and most commonly used method of depreciation is the straight line method or straight line accelerated depreciation method.

The straight line depreciation method takes the purchase or acquisition price, subtracts the salvage value and then divides it by the total estimated life in years.

For example, an equipment worth $1m with an estimated life of five years and salvage value of $100,000 would have the following depreciation schedule and asset value after each year as shown below.

Straight Line Accelerated Depreciation Method Illustrated

Depreciation Expense = (Total Acquisition Cost – Salvage Value) / Useful Life

Straight Line Accelerated Depreciation

Straight Line Accelerated Depreciation

The characteristics of the straight line method is that the depreciation expense is constant so the valuation of the company is easier as you know how to adjust it if necessary. Plus, it is easy to predict.

Accelerated Depreciation Method

As the name suggests, this method allows companies to write off more of their assets in the earlier years and less in the later years. The biggest benefit of this method is the tax benefit. By writing off more assets against revenue, companies report lower income and thus pay less tax.

The common method of accelerated depreciation is called the double declining balance (DDB) method. This is where the depreciation expense doubles the straight line depreciation expense of the first year. The same percentage is then applied to the non depreciated amount in the subsequent years.

DDB in year 1 = 2/n * (Total Acquisition Cost – Accumulated Depreciation)

where n = number of years

DDB in year 2 and beyond = 2/n * (Asset Value on Balance Sheet)

Straight Line vs Accelerated Depreciation

Put these two side by side and you will be able to see the picture clearer.

In order to make the comparison as fair as possible, let’s assume company XYZ is just starting out as a business and they bought several new computers for their staff. The purchase value of the computers is $10,000.

But before I get into the analysis, click on the image below to get the investing red flags that will help you detect potential blow ups. You’ll also get exclusive content and resources that we don’t share anywhere else.

click to download the red flag prevention kit

Computers do not have a long useful life, but five years is realistic and adequate. Computers also deteriorate in value much quicker in the first year than the later years so an accelerated depreciation method is more than satisfactory. At then end of five years, computers are generally worthless so the salvage value will be $0.

As I mentioned earlier, one of the benefits to accelerated depreciation is the reduction of taxes, but another point of great benefit is if the equipment requires maintenance.

Accelerated depreciation will offset the increasing maintenance cost and essentially equalizes the combined charges of both maintenance and depreciation. The graph below is a simplified view of how the accelerated depreciation and maintenance cost works out to give a straight line total expense.

If the straight line method was used, the depreciation would be constant and the maintenance cost would increase which would increase the total expenses.

To see this side by side, we get the following table using the same assumptions as before but with the added maintenance expenses.

At the beginning of the life, the accelerated method obviously costs more but towards the later stages of the useful life, the expenses become much less.

In the first article I wrote comparing the aggressive and conservative methods, I labeled accelerated depreciation as the aggressive method. Reason being that by quickly reducing the depreciation expense, later on, the net income increases only due to the account method.

In the example with maintenance cost included, just after one year, the depreciation expense is already close to equal to the straight line method. By year three, the expense is much less compared to the straight line method, and so more revenue can be recognized without any improvements in business.

The straight line method on the other hand does not alter the performance of the business. It can be seen as a revenue smoothing method.

Depreciation Red Flags

That was the accounting part of it.

For the investing part of depreciation, it all depends on the type of company. If you are looking at a rapid tech company where assets lose most of the value within the first year, needs to be replaced regularly, and costs a lot to maintain, the accelerated method is the right choice.

This brings us to the big red flag related to depreciation.

If you come across a company where the depreciable life of the assets is extended or the useful life is much too long, watch out.

By depreciating assets too slowly, the company is using aggressive accounting. Sounds contradictory, but the result is that earnings are being manipulated by being artificially inflated.

This is true for amortization and writing off any other asset such as impaired assets and/or obsolete inventory.

When you go through the financial statements, quickly check what type of accounting method is used. Then compare it to a competitor and see whether it is inline with industry standards and suitable for the business model.

9 out of 10 times, you won’t find anything alarming, but that one time is what we are trying to protect ourselves from.

To get this kind of information and other exclusive articles before regular readers, get on the VIP Mailing List today.


What is Old School Value?

Old School Value is a suite of value investing tools designed to fatten your portfolio by identifying what stocks to buy and sell.

It is a stock grader, value screener, and valuation tools for the busy investor designed to help you pick stocks 4x faster.

Check out the live preview of AMZN, MSFT, BAC, AAPL and FB.

4 responses to “Understanding the Straight Line and Accelerated Depreciation Methods”

  1. Valerie says:

    Hi Mr. Jun,

    Thank you for the great explanations. I need to send a demand letter for damages to my parent’s commercial building and equipment by a tenant over a period of about twelve (12) years. The building is 32 years old but the equipment is newer.

    In requesting an amount to cover our costs for repair, replacement and rental loss, should I calculate an accelerated depreciation or use straight line –or will neither apply? Can I use the same calculations on the land, building and equipment? I apologize for taking your time with this small issue. I would be happy to compensate you if that is an option.

    Thank you,


  2. Hi Valerie,

    It was nice talking to you. Seems like my comment didn’t show up yesterday.

    Just to give you a quick rundown here are my recommendations.

    Make sure the depreciation method is consistent with what has been used when filing taxes.
    Normally, the straight line method is the default method.
    Equipment usually depreciates over 7-8 years. So your claim would be for the numbers of years minus the years where there were no issues.

    Same method can be applied to building, but buildings depreciate over a longer period. I can’t remember the average depreciation period.

    Hope that helps!

  3. akib says:

    hi Mr. Jun, thank you very much for sharing such a valuable explanation. Actually i have a question that , there is a steel manufacturing company, it is facing problem in there financial performance from past 3 years due to recession. So the president of the company says that we are currently following tonnage of production depreciation method and suggests to change it to straight line method for financial reporting purpose, so that it could help them in eliminating the deferred tax liability on the balance sheet and will help in leverage of company profits if business picks up in year 4 . so according to you should we change as per his suggestion or we should rely on our own method…. please give your answer with an explanation

Pick Winning Stocks and Fatten Your Portfolio